Simulation stopped, PC: 80008B1F (BRB 80008B1F)
sim> att rx netrtg040.rx1
sim> c

Username: SYSTEM
Password: 
        Welcome to VAX/VMS version V4.4
$ 
$ mc sysgen
SYSGEN>  CONNECT CONSOLE
SYSGEN>  EXIT
$
$ @sys$update:vmsinstal netrtg040


        VAX/VMS Software Product Installation Procedure V4.4    


It is 1-APR-1986 at 11:55.
Enter a question mark (?) at any time for help.

* Are you satisfied with the backup of your system disk [YES]? yes
* Where will the distribution volumes be mounted: csa1:

%DCL-I-ALLOC, _CSA1: allocated

Please mount the first volume of the set on CSA1:.
* Are you ready? yes
%MOUNT-I-MOUNTED, NETRTG040    mounted on _CSA1:

The following products will be processed:

  NETRTG V4.0


        Beginning installation of NETRTG V4.0 at 11:55

%VMSINSTAL-I-RESTORE, Restoring product saveset A...

    DECnet-VAX Full Function Key installation

%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.NETRTG040]NETACP.EXE;1
%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...

        Installation of NETRTG V4.0 completed at 11:55


Please mount the console volume on CSA1:.
* Are you ready? yes

%MOUNT-I-MOUNTED, CONSOLE      mounted on _CSA1:

        VMSINSTAL procedure done at 11:56


$ @startnet
You have not yet configured your DECnet permanent database.  You must
either use NCP to define your DECnet database, or invoke the command
procedure SYS$MANAGER:NETCONFIG.COM, which will do it for you.
$ @netconfig

        DECnet-VAX network configuration procedure

This procedure will help you define the parameters needed to get DECnet 
running on this machine.  You will be shown the changes before they are 
executed, in case you wish to perform them manually.

What do you want your DECnet node name to be?               : ISAAC
What do you want your DECnet address to be?                 : 1.11
Do you want to operate as a router?        [NO (nonrouting)]: 
Do you want a default DECnet account?                  [YES]: 

        Here are the commands necessary to setup your system.

--------------------------------------------------------------------------
$ RUN SYS$SYSTEM:NCP
    PURGE KNOWN OBJECTS ALL
    PURGE MODULE CONFIGURATOR KNOWN CIRCUITS ALL
$ DEFINE/USER SYS$OUTPUT NL:
$ DEFINE/USER SYS$ERROR NL:
$ RUN SYS$SYSTEM:NCP    ! Remove existing entry, if any
    PURGE NODE 1.11 ALL
    PURGE NODE ISAAC ALL
$ RUN SYS$SYSTEM:NCP
    DEFINE EXECUTOR ADDRESS 1.11 STATE ON
    DEFINE EXECUTOR NAME ISAAC
    DEFINE EXECUTOR MAXIMUM ADDRESS 255
    DEFINE EXECUTOR TYPE NONROUTING IV
    DEFINE EXECUTOR NONPRIVILEGED USER DECNET
    DEFINE EXECUTOR NONPRIVILEGED PASSWORD DECNET
$ DEFINE/USER SYSUAF SYS$SYSTEM:SYSUAF.DAT
$ RUN SYS$SYSTEM:AUTHORIZE
    ADD DECNET /OWNER="DECNET DEFAULT" -
        /PASSWORD=DECNET -
        /UIC=[376,376] /ACCOUNT=DECNET -
        /DEVICE=SYS$SPECIFIC: /DIRECTORY=[DECNET] -
        /PRIVILEGE=(TMPMBX,NETMBX) -
        /DEFPRIVILEGE=(TMPMBX,NETMBX) -
Press RETURN to continue

        /FLAGS=(CAPTIVE) /LGICMD=NL: -
        /NOBATCH /NOINTERACTIVE 
$ CREATE/DIRECTORY SYS$SPECIFIC:[DECNET] /OWNER=[376,376]
$ RUN SYS$SYSTEM:NCP
    DEFINE LOGGING MONITOR STATE ON
    DEFINE LOGGING MONITOR EVENTS 0.0-9
    DEFINE LOGGING MONITOR EVENTS 2.0-1
    DEFINE LOGGING MONITOR EVENTS 4.2-13,15-16,18-19
    DEFINE LOGGING MONITOR EVENTS 5.0-18
    DEFINE LOGGING MONITOR EVENTS 128.0-4
--------------------------------------------------------------------------

WARNING: no lines have been defined.
Do you want to go ahead and do it? [YES]: 
%UAF-I-ADDMSG, user record successfully added
%UAF-I-RDBADDMSGU, identifier DECNET value: [000376,000376] added to RIGHTSLIST.DAT
%UAF-I-DONEMSG, system authorization file modified
%UAF-I-RDBDONEMSG, rights database modified
%NCP-I-NMLRSP, listener response - Success 
Logging sink type = monitor
%NML-I-RECADDED, Database entry added

The changes have been made.

If you have not already installed the DECnet-VAX license, then do so now.

After the license has been installed, you should invoke the procedure
SYS$MANAGER:STARTNET.COM to startup DECnet-VAX with these changes.

(If the license is already installed) Do you want DECnet started? [YES]: 
%%%%%%%%%%%  OPCOM   1-APR-1986 11:57:32.62  %%%%%%%%%%%
Message from user DECNET
DECnet starting
%RUN-S-PROC_ID, identification of created process is 00000088
%RUN-S-PROC_ID, identification of created process is 0000008A
$ sh sys
VAX/VMS V4.4  on node ISAAC  1-APR-1986 11:57:38.82   Uptime    0 00:03:03
  Pid    Process Name    State  Pri      I/O       CPU       Page flts Ph.Mem
00000080 NULL            COM      0        0   0 00:02:36.34         0      0   
00000081 SWAPPER         HIB     16        0   0 00:00:00.08         0      0   
00000084 ERRFMT          HIB      8       27   0 00:00:00.09        69     90   
00000085 OPCOM           LEF      6       22   0 00:00:00.09       157    183   
00000086 JOB_CONTROL     HIB      8       14   0 00:00:00.09        82    205   
00000087 SYSTEM          CUR      4     1696   0 00:00:19.27     15068    150   
00000088 NETACP          HIB     10       13   0 00:00:00.15       234    139   
00000089 EVL             HIB      4       34   0 00:00:00.13       269    119  N
0000008A REMACP          HIB      8        7   0 00:00:00.04        64     33   
$ 
